Polymer Battery Wireless Air Inflator Self-Illumination Overcharge Protection
Wireless Air Inflator Principle:
When the tire pressure drops to a preset value, a regulator in the tire will open, allowing air to enter a suction pipe; Through the tire into the intake valve, and then into the tire. When the motor is running and pumping air, the valve of the connector is opened by the air pressure of the atmosphere, and the gas enters the air cylinder. When pumping air into the tire, the valve is closed by the air pressure in the air cylinder, and the gas enters the tire.
Wireless Air Inflator Parameter:
| Storage temperature | -20～60℃ | battery capacity | 8800mAh |
| Product Size | 150x129x37mm | Operating temperature | -20~50℃ |
| charging port | Type-C | inflation speed | Car tires (185/60/R15) about 5 minutes |
| Charging parameters | DC5V/2A | Inflatable tire time | Fully charged can be used continuously for 30 minutes. |
| USB output | DC5V/2A | Instantaneous maximum current | 600A |
| charging time | about 6 hours | Trachea size | The length of the trachea pulled out is 240mm (including the gas nozzle) |
| LED lighting | 1 LED light | Battery folder | Equipped with 1 rear power supply clip |
Wireless Air Inflator Advantage:
1. Polymer battery
2. Overcharge protection
3. Voltage stabilization protection
4. Cross-current protection
5. Short circuit protection
6. Over-discharge protection
7. Anti-anti-protection
8. Temperature protection
9. Magnetic field protection
Product Tags:
|
|
Smart Tire Pump Wireless Air Inflator Self-Illumination Overcharge Protection Images
|
